Shurhold Buff Magic is a revolutionary product in the field of boat maintenance and detailing. Its unique formula and advanced technology make it the perfect solution for restoring the shine and luster of various surfaces, including fiberglass, gelcoat, chrome, and stainless steel. **The main idea behind Shurhold Buff Magic** is to provide boat owners and enthusiasts with a high-quality and easy-to-use product that can effectively remove chalky residue, oxidation, stains, and scratches from their boat's exterior. This versatile compound is designed to perform multiple tasks, eliminating the need for several different products. One of the **key features of Shurhold Buff Magic** is its ability to clean and restore the surface while also leaving behind a protective barrier. This protective barrier acts as a shield against UV rays, saltwater, and other harsh environmental elements, helping to maintain the glossy finish for a longer period.

How To Choose Your Pads

WOOL PAD - highly aggressive pads used for cutting or heavy compounding and removes extreme swirls or oxidation on very hard paint. It removes heavy oxidation much better than foam pads and generates less heat resulting in cooler surface. That said, wool is also safer to use on heat sensitive parts of your car such as bumpers and spoilers. The caveat is that it can leave buffer trails if you are not skillful enough.

CUTTING PAD - used for non-agressive cutting (moderate cut compared to wool pads). Use for removing buffing swirls or trails, oxidation and scratches.

POLISHING PAD - used for paint cleaning, remove swirl marks, light scratches, fine sanding scratches, and other defects in your car's paint.

FINISHING PAD - provides very little or no cut. Use for applying pure polish, wax, glazes, and sealant without marring the paint and produce a high gloss show car shine finish.

When choosing the proper pad for cutting or polishing, always make sure you match the aggressiveness of the compound/polish you are using with the aggressiveness of the pad. A mismatched combination creates unneeded work and waste your time and product, so make sure you have the right pad and polish for the job.

PAD FACE AND SIZE EXPLAINED

FLAT FACE

Most popular version, it works at the highest efficiency for cutting and polishing paint surfaces

WAFFLE FACE

The waffle-wave design reduces heat and speed-up the air flow to cool the pad against overheating the surface.

FOAM PAD SIZE DIFFERENCE

8" Ø - For maximum buffing coverage and efficiency; best for high production volume.

6" Ø - Most versatile size for buffing and achieve the best finish.

3" Ø - For hard-to-reach areas such as headlight and spot buffing.

DIFFERENCE BETWEEN THE PRO AND PREMIUM SERIES

Use this chart merely as a guide. Comprehensive compounding and polishing requires professional knowledge. Always check and follow the instructions of the manufacturer and compound's directions to avoid damaging your paint. And do not forget to clean your pads regularly after using to prolong its life.

Compounding with Buff Magic and our Polisher

Start by setting up your polisher with a clean wool Buff Magic Pad. These wool pads are more aggressive and work in connection with our Buff Magic compound very well. Regardless if the pad is brand new or used and cleaned we want to fluff it and knock out any extra fuzz with our pad fluffing brush.

We will work in small 2-foot square areas at a time and move on as we finish each area.

Using your chip brush we want to apply a series of X’s to the surface. Do not apply the product to the pad as this will cause premature overloading and clumping of the pad. Once the product is on the surface place the pad face on the surface and turn on the machine. We want to start at a speed setting of 3.

The reason we start with the pad on the surface before turning it on or off, this helps reduce slinging and mess of the product.

As soon as the machine is on, we want to keep it moving using the following overlapping pattern. You do not want to apply a lot of pressure. On a horizontal surface, the weight of the machine is enough. On a vertical surface, you want to apply light pressure. Once we have done that pattern, we will do it again in the opposite direction. You should slowly move through this pattern set a couple of times over 2-3 minutes. As I go into the last pass of the pattern I like to speed up the tool to a 4 or 5. Remember to turn the tool off before picking it up.

Now use a microfiber towel to remove all the haze and excess material. If the surface has that showroom shine you are looking for then you are all set to go on to your next area. If not, you have a deeper level of oxidation and you may have to repeat these steps a few more times.

When I go to my next area I like to overlap the last area by about 6 inches to make sure I do not miss any spots. Also, I make it a habit of fluffing the pad between each area. This will help keep the pad for getting to matted down and stop working.

Here are a couple of more tips and pitfalls to avoid:

• Do not use too much product, less is more
• Once the pad has been primed, do not apply the product directly to the pad.
• Always work a small section at a time and remove excess compound immediately

Removing oxidation and bringing out a showroom shine will enhance the beauty and value of your boat. Don’t forget once you are done you sill still need to put a protective coating on the surface to prevent premature oxidation in the future. With a little time and patience, you can detail like the pros.

Until next time keep your boat CLEAN-N-SIMPLE!

One of the questions I get asked the most is what is the proper procedure for compounding using Buff Magic on the boat.

So let's take a look at what we need and how to do this. Before we begin make sure you have:

• Buff Magic
• Dual Action Polisher w/ Wool Compound Pads
• Pad Fluffing Brush
• Chip Brush
• Microfiber Towels

Start by setting up your polisher with a clean wool Buff Magic Pad. These wool pads are more aggressive and work in connection with our Buff Magic compound very well. Regardless if the pad is brand new or used and cleaned we want to fluff it and knock out any extra fuzz with our pad fluffing brush.

We will work in small 2-foot square areas at a time and move on as we finish each area.

Using your chip brush we want to apply a series of X’s to the surface. Do not apply the product to the pad as this will cause premature overloading and clumping of the pad. Once the product is on the surface place the pad face on the surface and turn on the machine. We want to start at a speed setting of 3.

The reason we start with the pad on the surface before turning it on or off, this helps reduce slinging and mess of the product.

As soon as the machine is on, we want to keep it moving using the following overlapping pattern. You do not want to apply a lot of pressure. On a horizontal surface, the weight of the machine is enough. On a vertical surface, you want to apply light pressure. Once we have done that pattern, we will do it again in the opposite direction. You should slowly move through this pattern set a couple of times over 2-3 minutes. As I go into the last pass of the pattern I like to speed up the tool to a 4 or 5. Remember to turn the tool off before picking it up.

Now use a microfiber towel to remove all the haze and excess material. If the surface has that showroom shine you are looking for then you are all set to go on to your next area. If not, you have a deeper level of oxidation and you may have to repeat these steps a few more times.

When I go to my next area I like to overlap the last area by about 6 inches to make sure I do not miss any spots. Also, I make it a habit of fluffing the pad between each area. This will help keep the pad for getting to matted down and stop working.

Here are a couple of more tips and pitfalls to avoid:

• Do not use too much product, less is more
• Once the pad has been primed, do not apply the product directly to the pad.
• Always work a small section at a time and remove excess compound immediately

Removing oxidation and bringing out a showroom shine will enhance the beauty and value of your boat. Don’t forget once you are done you sill still need to put a protective coating on the surface to prevent premature oxidation in the future. With a little time and patience, you can detail like the pros.

Until next time keep your boat CLEAN-N-SIMPLE!

Learn How To Buff Using a Rotary Polisher!

Start by applying Buff Magic to the surface you’re working on. It’s best to work in moderate temperatures and out of direct sunlight. Make sure the pad is clean by using a stiff brush or spur to scour the top of the pad. NOTE: The Polisher should be on lowest speed setting for this step. That will remove any loose debris and prevent scratches in the surface. Before turning the machine on, spread the compound with the pad. Next, with the pad still touching the surface, turn the speed setting to 1600 RPM and start the machine.

As you work the Buff Magic in, keep the machine moving in an overlapping up and down / left and right pattern. This will keep the surface temperature from becoming too hot and work the area evenly. As the Buff Magic begins to break down and the color disappears, turn up the speed on the machine to 2600 RPM to emphasize the polishing stage of Buff Magic. This will result in a much deeper shine and smoother surface. Once the product has been completely broken down a shiny, oily haze will remain. Remove that with a clean Microfiber Towel. Use a little water if necessary as the leftovers can be difficult to remove in high heat. Your surface should now have a great reflection and be ready for wax! Repeat the process over the rest of your boat, taking your time to ensure proper technique and coverage. You’ll be amazed at the results when you do.

Until next time, Shurhold is here to keep your Car, Truck, Boat, or RV Clean-N-Simple!

If you want to get results as quickly and efficiently as a professional detailer, then a traditional Rotary Polisher is the choice for you. Today we’re going to teach you the basics of this machine so you too can restore heavily oxidized and dull finishes like a professional.

If you want to get results as quickly and efficiently as a professional detailer, then a traditional Rotary Polisher is the choice for you. Today we’re going to teach you the basics of this machine so you too can restore heavily oxidized and dull finishes like a professional.

You may have heard that a Rotary Polisher can burn or leave swirls in your finish. While this is true, both of these issues are avoidable with a little diligence and practice. The keys to using a Rotary are to keep the pad moving and to keep the pad flat. As long as you can do those two things, you’ll master the tool in no time.

What you need:

Start by applying Buff Magic to the surface you’re working on. It’s best to work in moderate temperatures and out of direct sunlight. Make sure the pad is clean by using a stiff brush or spur to scour the top of the pad. NOTE: The Polisher should be on lowest speed setting for this step. That will remove any loose debris and prevent scratches in the surface. Before turning the machine on, spread the compound with the pad. Next, with the pad still touching the surface, turn the speed setting to 1600 RPM and start the machine.

As you work the Buff Magic in, keep the machine moving in an overlapping up and down / left and right pattern. This will keep the surface temperature from becoming too hot and work the area evenly. As the Buff Magic begins to break down and the color disappears, turn up the speed on the machine to 2600 RPM to emphasize the polishing stage of Buff Magic. This will result in a much deeper shine and smoother surface. Once the product has been completely broken down a shiny, oily haze will remain. Remove that with a clean Microfiber Towel. Use a little water if necessary as the leftovers can be difficult to remove in high heat. Your surface should now have a great reflection and be ready for wax! Repeat the process over the rest of your boat, taking your time to ensure proper technique and coverage. You’ll be amazed at the results when you do.

Until next time, Shurhold is here to keep your Car, Truck, Boat, or RV Clean-N-Simple!

Shurhold Buff Magic Compound Surface Reconditioner & Metal Polish - 22oz

Buff Magic is scientifically formulated with jeweler's rouge to be a metal polish, as well as a buffing and polishing cream. This unique formula changes as you use it. With each pass of a buffer or hand polishing the proprietary abrasives in this compound break down smaller and smaller. This effectively creates a compound that can work your finish from very dull to ultra glossy with just one product. Additionally, since you do not have to switch products, this will save you time and money.

Buff Magic removes:

• oxidation
• gelcoat staining
• surface rust
• tarnish
• Plexi-glas scratches
• P800 and finer DA scratches

Buff Magic is perfect for:

• Boats
• Cars
• Rv's
• Pot & Pans
• Acrylic Tubs & Showers
• and much more.

Buff Magic has been formulated to be user friendly whether buffing by machine or hand. It is also an ideal metal cleaner and polisher for steel, aluminum, brass, bronze, copper, gold and other precious metals.

Buff Magic is a NMMA Innovation Award Winner.

Manufacturer Part Number: YBP-0101

Return Policy

Hodges Marine accepts returns for up to thirty (30) days after shipment. Our return policy does not apply to the following goods: Open software, mapping/chart data cards, international orders, freight truck only items, and special order items. These items are not eligible for return, refund or exchange. Shipping charges (if any) are non-refundable. If your return is accepted by Us, We will provide one of the following within a reasonable time: an exchange of merchandise for the item returned, a non-transferable merchandise credit, a credit to the payment card or original method of payment used to pay for the item, a check, or another remedy that we determine in good faith is appropriate in the circumstances. Customer must request a return merchandise authorization (RMA) through the product returns link on our website or by emailing us at [email protected]. A RMA number will be issued with instructions for returning the package within a reasonable time (normally 1-3 business days).

This protective barrier acts as a shield against UV rays, saltwater, and other harsh environmental elements, helping to maintain the glossy finish for a longer period. Another advantage of Shurhold Buff Magic is its user-friendly nature. It can be applied by hand, using a microfiber cloth or sponge, or with the help of a machine buffer for larger surface areas.

The formula is non-abrasive, making it safe to use on delicate surfaces without causing any damage. **The effectiveness of Shurhold Buff Magic** is evident in the before-and-after results. It transforms faded and dull surfaces into vibrant and glossy finishes that look brand new. Boat owners can see a significant improvement in the overall appearance of their vessel, leaving a lasting impression on both themselves and others. In conclusion, Shurhold Buff Magic is a highly recommended product for boat owners who want to keep their vessel looking its best. Its innovative formula, easy application, and impressive results make it a top choice in the world of boat maintenance and detailing..

Reviews for "Shurhold Buff Magic: Protecting Your Investment with Long-Lasting Shine"

1. John - ★☆☆☆☆

I was really disappointed with Shurhold Buff Magic. I had high hopes for this product after reading some positive reviews, but it just didn't deliver for me. The first issue I had was with the consistency of the product. It was clumpy and difficult to spread evenly on the surface. Secondly, it didn't seem to have much of an effect on removing scratches or restoring the shine to my car. Overall, I found it to be ineffective and a waste of money.

2. Sarah - ★★☆☆☆

I have mixed feelings about Shurhold Buff Magic. While it did manage to remove some minor scratches from my car, it was not as effective as I had hoped. I found myself needing to apply multiple layers and spend a lot more time buffing than I anticipated. Additionally, the strong chemical smell was quite off-putting. I think there are better options out there for car buffing products.

3. Mike - ★★☆☆☆

I purchased Shurhold Buff Magic based on the hype, but I regretted it. The product did manage to remove some surface scratches on my boat, but it wasn't as impressive as I expected. I also found that it left behind a residue that was difficult to remove, even with extra polishing. Overall, I don't think it's worth the price, and there are better alternatives available on the market.

Shurhold Buff Magic: Say Goodbye to Swirl Marks and Scratches